Customizing Settings

作者：信息来源:无忧机械电子 2006-10-17

字体大小:小 中 大网友评论条 进入论坛

This section describes the settings you can access through the Tools - Options command in the menu bar。 Click Tools - Options in the menu bar。The Options dialog box is displayed。 Click Equipment Systems under the Options heading in the left column。...

This section describes the settings you can access through the Tools -> Options command in the menu bar. These settings are stored in permanent setting files and will not be lost when you end your session.

Click Tools -> Options in the menu bar.
The Options dialog box is displayed.

Click Equipment & Systems under the Options heading in the left column.

Click the Electrical Cableway Routing workbench.
The Electrical Cableway Routing tab displays:

Use the Separation Code File area to define segregation code rules you can use to optimize automatic routing:

select File Based to choose the segregation code file by browsing for a text file. (Creating File-Based Design Rules describes the format for creating a text file.) You can also select Cable-Cable Check to manage compatibility between cables.

select Rule Based to use CATIA Knowledgeware to define a rule made up of one or more conditions. Only one rule can be implemented at a time, but this rule may combine several conditions.

Click the Edit button to enter a new rule: the Routing Rule Editor is displayed.
The line above the input field is a reminder of the Knowledgeware syntax.

Use the Eraser icon to clear the input field.