DMU Clash - Penetration

作者：信息来源:无忧机械电子 2006-10-17

字体大小:小 中 大网友评论条 进入论坛

The DMU Clash - Penetration tab contains only one category of options: Mode of Penetration。Mode of Penetrationselectthe option defining how penetration depth is computed。In this mode, penetration depth corresponds to the minimum distance by which it is necessary to translate an element to avoid a ...

The DMU Clash - Penetration tab contains only one category of options: Mode of Penetration.

Mode of Penetration

select the option defining how penetration depth is computed. Two modes are available:

Element

Product

Element

This mode lets you assess the seriousness of a clash.

In this mode, penetration depth corresponds to the minimum distance by which it is necessary to translate an element to avoid a clash. The calculation is repeated for each pair of clashing elements and the maximum penetration depth output.

If you then translate the element, elements no longer clash but are in contact.

In our example, the green product (A) comprises three elements and the blue product (B) two elements.

Two different pairs of elements are clashing: A1 and B1; A2 and B2. The penetration depth for the first pair of elements is N1; for the second pair N2. The largest value is output, in our case, N2.Note: You cannot use this calculation to translate products and avoid clashes

Product

In the Product mode, penetration depth (visualized by a vector) is the minimum distance by which it is necessary to translate a product to avoid a clash. If you then translate the product, products no longer clash but are in contact.

This mode corresponds to the penetration depth computation prior to Version 5 Release 8.