This page deals with the following settings:
Work On Support
Work On Support 3D
Define the First direction scale (H for horizontal), by setting Primary spacing and Graduations values.
By default, this option is set to 100mm for primary spacing and 10 graduations.
If you wish, you can define another scale for the Second direction scale (V for vertical), thus allowing distortions of the grid. Check the Allow distortions option to activate the Primary spacing and Graduations fields of the second direction.
By default, this option is not selected.
For further information, refer to Working With a Support.
By default, the Labels are set to X, Y, and Z for the first, second and third directions, and the Primary Spacing is set to 100mm for all directions.
Define the Grid labels unit, that is the coefficient of division for all straight lines units.
For example, the grid label unit is set to 1 and the X label for one line is set to 500. If you modify the grid label unit to 10, the X label will be 50.
By default, this option is set to 1.
Define the Automatic Scale Factor, that is the scale to be used when the grid becomes too small. The factor is comprised between 2 to 10.
By default, this option is set to 10.
Define the Maximum lines number to be displayed on the screen, from 70 up to 500 lines.
By default, this option is set to 70.
All these values will be used as the default values when creating a support.
For further information, refer to Working With a 3D Support.
针对级进模排样的特点以及人工智能技术在工程领域应用的研究，提出了适用于级进模排样...
您知道全球最小的机器人到底有多小呢。这么小的机器人到底有什么样的法宝呢。中国台湾...
前言 线切割加工通过电极丝与导电工件之间放电腐蚀成型来完成工件加工，由于是非接触加...
本报北京8月27日讯 记者郭晓宇“尽管近两年在节能减排方面已取得积极进展，但经济增长...
“国际竞争国内化，国内竞争国际化。”这句话在目前中国的各个行业被频频提及，它概括...
