Migration Batch

作者：信息来源:无忧机械电子 2006-10-17

字体大小:小 中 大网友评论条 进入论坛

This tab deals with the following categories of options: Format, V4 Part Definition, Conversion Mode, Drawing Parameters, Mapping Files Location forSaving, Mapping Files Location forRetrieving, Migration Interface。 These options are only useful in the Migration Batch context, not with interactive C...

This tab deals with the following categories of options: Format, V4 Part Definition, Conversion Mode, Drawing Parameters, Mapping Files Location for Saving, Mapping Files Location for Retrieving, Migration Interface.

These options are only useful in the Migration Batch context, not with interactive CATIA V5.

Format

As SPEC

With the AS SPEC format, you can get the model's specifications in a first place and the geometry in a second place (after updating the document). Then you can modify the elements you have converted into CATIA V5.

It is the default value.

As RESULT

The AS RESULT format allows you to migrate the V4 elements that cannot be converted AS SPEC. And this operation is more efficient in terms of performance.

V4 Part Definition

A CATPart by Geometric Set

If you check this option A CATPart by Geometric Set, the "V4 Part" definition is the Geometric Set. Therefore, the subsets will be migrated into a V5 CATPart document.

It is the default value.

A CATPart by Solid

With this option A CATPart by Solid, the "V4 Part" definition can also be a Solid. The Solids will be migrated into CATParts and the non-solid elements (for instance: Wireframe) into a CATPart as well.

Conversion Mode

Convert SPACE / DRAW

If you choose this option Convert SPACE and DRAW, it means that you selecting the Migration of SPACE / DRAW data in Batch Mode.

According to its content, a model is migrated into several documents: a CATPart and / or a CATProduct and / or a CATDrawing. It is possible to separate the treatment of SPACE data and DRAW data. In the Batch window, there is an Options button giving you access to this Tools-Options window and you can choose between Space And Draw, Space, and Draw.

Some entities undergo a few changes during the V4 to V5 conversion:

V4 DRAFT -> V5 Sheet, V4 Detail -> V5 Detail Sheet, V4 Views -> V5 Views.

In the Batch Mode, all Draw and Detail workspaces are migrated in CATIA V5. On the contrary, if you Copy / Paste a Draft or a View interactively, only referenced Details are migrated.

It is the default value.

Convert SPACE only

There are 2 Part definitions; the migration of each Set respects the definition determined by the "V4 Part definition" a few lines above.

Every Workspace containing several Dittos or Set instances is converted as a CATProduct. Under this CATProduct, there are as many components as Dittos (Part or Product instances) and Sets.

The impacts of the V4 to V5 conversion on the entities:

V4 Set -> V5 Part, V4 Detail -> V5 Part or Product, V4 Model -> V5 Part or Product and/or CATDrawing, V4 Ditto -> V5 Product component.

Convert DRAW only

When a model contains DRAW data, they are migrated as a unique document: a CATDrawing.

Display Report Attribute

This functionality allows the visualization of 3D elements attributes in the Migration Report. For each element, the list of its attributes is displayed with the following data:

The name of the attributes

The value of the attributes

The CATV4ToV5Migration interface is unchanged.

The Report window displays attributes information.

There are some limitations: Display of geometrical elements' attributes (2D and 3D elements) only. You can find the information about the 3D elements in the interactive report and about the 2d elements in the .rpt file. Display of only the attributes which have a value. For example, empty words that is to say words with no number are not displayed.

Drawing Parameters

Initial Drawing Path

select a .CATDrawing document which will serve as a template. The standard used by this document will be used during the migration. If you leave this field blank, the standard used by default during the migration will be the last one you used when creating a drawing.

The customer can use environment variables:

He pre-defines an environment variable:

on Windows: set FILE_PATH_ENV=C:\Documents and Settings\xxx on UNIX: export FILE_PATH_ENV=/u/users/Documents and Settings/xxx

The name of the variable is chosen by the user.
The user fills the editor with a path containing this environment variable.

The user switches tab page or clicks OK. Then he comes back to the modified tab page: the path contains no environment variable anymore. Instead, the full expanded path appears on the tab page:

Projection of Space for transparent views

Specify what kind of projection mode you want to use for transparent views during the migration:

the NHR V4 Mode, the HLR V4 Mode, or the Same projection mode as the V4 Model.

The Same as V4 model option is the default value.

Mapping Files Location for Saving

This functionality allows you to find pointed entities in V4 Multi Model Links Solids and to retrieve associativity in CATIA V5. You can store them in the following directories:

Batch Target Directory.

It is the default value.

Model Directory: a mapping table per model is available; it is stored at the same place where the associated model is. Specified Directory: you can specify the directory path of your choice.

Mapping Files Location for Retrieving

When you migrate the pointing model, you need to know where the mapping table is, in order to retrieve the V5 entities.

The mapping table has the same name as the model; this is why it is important not to change the name of the mapping table. It is also not recommended to rename V5 documents otherwise you will not be able to find them in the next migrations, and therefore to recreate the V5 associativity. If you cannot find the mapping table, a Migration As Result will take place: first, the pointed models are migrated and then the pointing models (asynchronous migration).

If you cannot find the pointed element, the link between the models cannot be reproduced.

Click Add repository to find the mapping table location. With the arrows (Up and Down), you can move in the list and with the rubber button, you can erase a file location.

Migration Interface

This option allows you to customize Applications' migration from CATIA V4 to CATIA V5. You can specify a particular behavior for this migration. You can choose how your applicative data will be migrated by writing source code (only two interfaces: CATIAecMigration and CATIE3DMigration) in this empty field.