catia

2006-10-17[图]IGES

摘要：This task shows you how to customize IGES settings, that are divided in four sections: General IGES options: Show/NoShow dialog box Import IGES options: Import mode, Join, Continuity Optimization of Curves and Surfaces, ...
2006-10-17[图]IGES 2D

摘要：This page deals with: Import IGES 2D options: Standards, Unit of the file, Destination view, Create end points, Convert dimensions as, Export IGES 2D options: Exported sheets, Export mode。Unit of the file By default, th...
2006-10-17[图]StiSmartBOM

摘要：This tab contains options forexporting orimporting SmartBOM Briefcases fromCATIA Version 5。 These options are available (not grayed) if you have previously installed SMARTEAM-BOM。 Exporting BOM Briefcases enables you t...
2006-10-17[图]STEP

摘要：This page deals with: General STEP options: Detailed report, Geometric Validation Properties (GVP), Groups (Selection Sets)。 Import STEP options: Continuity optimization of curves and surfaces, Assemblies physical struc...
2006-10-17[图]VRML

摘要：This tab deals with the following categories of options: import unit import options export version export options Import: UnitLets you selectthe desired unit forthe VRML file to be imported: Meter (m), Millimeter (mm) or...
2006-10-17[图]Parameters and Measure

摘要：This page deals with Parameters and Measure options in the following tabs: the Knowledge tab lets you specify the options when working with Knowledgeware relations, parameters and design tables the Units tab lets you cus...
2006-10-17[图]Knowledge

摘要：This page deals with these categories of options:Parameter Tree View Parameter names Relations update in part context Design Tables Parameter Tree ViewThere are 2 types of items that you can display in the specification ...
2006-10-17[图]Units

摘要：This page deals with the following categories of options:Units Dimensions display UnitsUnitsYou can define orredefine: the default unit and the display of values formagnitude type parameters。 The default unit along with...
2006-10-17[图]Knowledge Environment

摘要：This page deals with the following categories of options:Language Reference Directory forTypes Knowledge Environment LanguageThis field is to be used when using measures in relations oruser functions。 Measures are speci...
2006-10-17[图]Identification

摘要：The Identification settings page concerns the following settings categories:Business Card Business CardThe Business Card enables you to identify yourself to the other users with whom you collaborate。The Business Card co...
2006-10-17[图]Connectivity

摘要：This task explains how to customize collaboration server connectivity settings。You must have the VPM Navigatorlicense, otherwise this setting page will be empty。The Connectivity settings page concerns the following set...
2006-10-17[图]Collaborative Design

摘要：The Collaborative Design settings page concerns the:Briefcase Merge Briefcase MergeApply viewpoint on mergeWhen checked, enables the user to apply the viewpoint when merging the briefcase and to set the Merge viewpoint o...
2006-10-17[图]Assembly Design

摘要：This page deals with Assembly Design options in the following tabs: The General tab lets you set the general options。 The Constraints tab lets you define the constraint options。...
2006-10-17[图]General

摘要：This page deals with the options concerning: The Update。 The Compute exact update status at open。 The Move components involved in a Fix Together。 UpdateDefines the assembly update activating options, which affects Ass...
2006-10-17[图]Constraints

摘要：This page deals with the options concerning: The Paste components。 The Constraints creation。 Paste componentsDefines the paste component behavioroptions:Without the assembly constraints: pastes one orseveral components...
2006-10-17[图]Sketcher

摘要：This page deals with Sketcher options in the following tab: The Sketcher tab lets you set the sketcher options。...
2006-10-17[图]Mold Tooling Design

摘要：This section deals with Mold Tooling Design customizing options。 These options can be reached via Tools/Options and are set out in three tabs: Catalogs, that defines the storage location of catalogs, Add/Remove, that al...
2006-10-17[图]Catalogs

摘要：Using catalogs stored in SmarTeamYou can customize your catalog storage so that you can retrieve components from, and store components in, SmarTeam (after intervention by your administrator)。 Here is an example to show ...
2006-10-17[图]Add/Remove

摘要：This tab serves to: associate add/remove bodies (pads, pockets, drillholes and tapholes) with receiving bodies, to filter the customized names of holes, pads and pockets foruse with the Distributed Drill Component comman...
2006-10-17[图]Component

摘要：therefore the option is selected by default forthese componentsThe column Selection filter allows the user to activate ornot know-how rules when creating components。 When activated, associated filters are applied in the...
2006-10-17[图]Structure Design

摘要：This page deals with the following category of options in the General tab: Color。...
2006-10-17[图]Drafting

摘要：This page deals with Drafting options in the following tabs:The General tab lets you set general settings to be used in the Drafting workbenches。 The Layout tab lets you customize options that will be used when creating...
2006-10-17[图]Layout

摘要：This page deals with the following categories of options in the Layout tab:View Creation New Sheet Background View Section / Projection Callout View Creation View nameselectthis option if you want the view name to be cre...
2006-10-17[图]Generation

摘要：This page deals with the following categories of options in the Generation tab:Dimension generation Balloon generation These options apply to the Generative Drafting workbench only。Dimension generation Generated dimensi...
2006-10-17[图]Geometry

摘要：Clear this check box if you do not need to create circle and ellipse centers。 By default, this option is selected。Allow direct manipulationselectthis check box to be able to move geometry using the mouse。 When moving ...