标准编号标准中文名称标准英文名称GB/T18689-2002 农业灌溉设备小型手动塑料阀Agricultural irrigation equipment--Manually operated small plastics valvesNF T54-082-1988 塑料。热固塑料阀。)BS EN 1704-1997 塑料管道系统。热塑塑料阀。...
标准编号
标准中文名称
标准英文名称
GB/T18689-2002
农业灌溉设备小型手动塑料阀
Agricultural irrigation equipment--Manually operated small plastics valves
NF T54-082-1988
塑料.热固塑料阀.耐压和密封性试验
(PLASTICS. THERMOPLASTIC AND THERMOSETTING VALVES. TEST OF RESISTANCE TO PRESSURE.)
BS EN 1704-1997
塑料管道系统.热塑塑料阀.弯曲情况下温度循环后阀门完整性的试验方法
(Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending)
EN 28233-1990
热塑性塑料阀门 扭矩 试验方法
Thermoplastics valves- Torque; test method (ISO 8233:1988)
EN 28659-1990
热塑性塑料阀门 疲劳强度 试验方法
Thermoplastic valves- Fatigue strength- Test method (ISO 8659:1989)
BS EN 28233-1992
热塑性塑料阀门的扭矩试验方法
(Thermoplastics valves - Torque - Test method)
BS EN 28659-1992
热塑性塑料阀门.疲劳强度.试验方法
(Thermoplastics valves - Fatigue strength - Test method)
ISO 7349-1983
热塑塑料阀.连接基准
(Thermoplastics valves; Connection references)
ISO 8659-1989
热塑塑料阀门.疲劳强度.试验方法
(Thermoplastics valves; fatigue strength; test method)
ISO 8233-1988
热塑塑料阀门.扭矩.测试方法
(Thermoplastics valves; torque; test method)
ISO 9393-2 Technical Corrigendum 1-1997
热塑性塑料阀门.压力试验方法和要求.第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和
(Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves; Technical Corrigendum 1)
ISO 9393-1-1994
热塑性塑料阀门.压力试验方法.第1部分:总则
(Thermoplastics valves - Pressure test methods and requirements - Part 1: General)
ISO 9393-2-1997
热塑性塑料阀门.压力试验方法和要求.第2部分:聚乙烯、聚丙烯、未增塑聚氯乙烯和聚偏氯乙烯阀门的试验条件和
(Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves)
ISO 9911-1993
农业灌溉设备.手工操做小型塑料阀门
(Agricultural irrigation equipment; manually operated small plastics valves)
